装修问答

框架结构的 钢筋和水泥都行 就是地基是石头做的 两层的 楼房?

5MM)钢筋砖,可以不做框架结构。通常盖两层楼房,其牢固度已足够、二楼门头板上方墙体也走钢筋砖,墙体用高标号水泥走(直径6,砌10寸砖墙,用石头大片做建房基础很多见,然后开始砌正墙,已有计划采用框架结构,在上楼板前,如浇注地梁,那么在大片基础找平后应做交圈地梁后,有构造立柱设计的应准备立模了在农村。当然在震动激烈的场合采用框架构造也行,只是造价高些

么么1009 152024-05-12

问什么啊?

婉儿xiaotu 252024-05-25

void numm(void){
num=0;
if(_it0==1){ //按键按下标志
if(GPIO_ReadInputDataBit(GPIOC,GPIO_Pin_5)==0){ //K1
Delay(0x3ffff);
if(GPIO_ReadInputDataBit(GPIOC,GPIO_Pin_5)==0){ //按键消抖动
while(GPIO_ReadInputDataBit(GPIOC,GPIO_Pin_5)==0);//是否松开按键
num=1; //键值1 为K1按下
goto n_exit;
}
}
}
else if(_it0==2){ //按键按下标志
if(GPIO_ReadInputDataBit(GPIOC,GPIO_Pin_2)==0){ //K2
Delay(0x3ffff);
if(GPIO_ReadInputDataBit(GPIOC,GPIO_Pin_2)==0){ //按键消抖动
while(GPIO_ReadInputDataBit(GPIOC,GPIO_Pin_2)==0);//是否松开按键
num=2; //键值2 为K2按下
goto n_exit;
}
}
}
else if(_it0==3){ //按键按下标志
if(GPIO_ReadInputDataBit(GPIOC,GPIO_Pin_3)==0){ //K3
Delay(0x3ffff);
if(GPIO_ReadInputDataBit(GPIOC,GPIO_Pin_3)==0){ //按键消抖动
while(GPIO_ReadInputDataBit(GPIOC,GPIO_Pin_3)==0);//是否松开按键
num=3; //键值3 为K3按下
goto n_exit;
}
}
}
n_exit:;
_it0=0;
}

夭爻溔訞濘綸 62024-05-15

没看懂问题请补充

蒲寫未來” 392024-05-23